Multi-Voltage Vehicle Detector

  • Universal voltage
  • Reduced inventory costs
  • Operates in both fail safe and fail secure modes
  • Reliability
Request Info

MVP D-TEK Overview

The MVP D-TEK multi-voltage vehicle detector makes it simple to manage your stock. All you need is one detector in your stock room and on your truck. This multi-voltage vehicle detector solves the problem of not knowing which voltage to take for service a call or installation. Reduce the cost of inventory by stocking only one loop detector – with the universal voltage of our MVP D-TEK.

Features of Our Multi-Voltage Vehicle Detector

  • Multi-voltage power 9 to 220 VAC/DC
  • Operates in both fail safe and fail secure modes
  • 10 sensitivity settings
  • Enhanced lightning/surge immunity
  • Aluminum RF shield housing
  • Built-in loop conditioner
  • Loop isolation transformer
  • Loop diagnostics
  • Frequency counter
  • Gold plated control contacts
  • 2 relays (presence & pulse or presence)
Power Supply 9VDC to 240VAC
Current Consumption 19.2mA @ 9VDC, 18.8 mA @ 12VAC/DC, 17.3 mA @ 24VAC, 9.5 mA @ 24VDC, 13.5 mA @ 115VAC
11.0 mA @ 237VAC
Operating Temp -40°F to +180°F
Surge Protection Zener Diode /MOV
Output Relays (2) 1Amp 30 VDC
Loop Input Transformer isolation, lightning and transient protection (1)
Loop Inductance Range 20 – 2000 uH Q-factor of 5 or higher
Tuning Automatic on reset or power up
Tracking Automatic for environmental changes
Size Height 3.25” (83mm) Width 2.56” (40mm) Length 3.65” (90mm)
Housing Extruded Anodized Aluminum
Connector 86CP11 11 pin male

11 position harness
3 feet of wire

Black 11 pin socket base for DIN rail mount

Black 11 pin socket base for DIN rail mount

Preformed loop
2×6, 4×6, 4×8, 4×10, 6×10 or 8×12 ft with 50 ft lead

Test loop
1.25 x 1.25 x 0.75 inches

Adobe_PDF_file_icon_32x32Spec Sheet
Adobe_PDF_file_icon_32x32Loop Sizes
Adobe_PDF_file_icon_32x32Loop Installation
Adobe_PDF_file_icon_32x32Preformed Loop Spec Sheet
Adobe_PDF_file_icon_32x32Test Loop Instructions