Vehicle Motion Detector with Sensing Probe

  • Easy to use and install
  • Easy upgrade or switch out to new devices
  • Quick access to controls
  • Buried sensing probe protects against potential intruders.
  • Wide power supply options
  • Energy conservation
Request Info
Categories: ,

The CarSense 101 Vehicle Motion Detector has a buried sensing probe to protect against vandalism. It is housed in a small, relay-type housing, making it easy to integrate with security control boards, gate and door operators.

The CS101 provides a solution for many vehicle detection challenges. Where safety is an issue, the CarSense 101 detects moving vehicles in blind areas along a driving path, and actuates warning lights.

Where security is an issue, the CarSense 101 detects approaching vehicles or an unauthorized movement of a parked vehicle and actuates alarms, video cameras or annunciator.

For access control applications requiring free exit, the CarSense 101 detects vehicles and actuates gates, overhead doors and other parking barriers.

  • Controls and indicators are mounted on front panel
  • Available in 9 – 41 VDC 6 – 29 VAC
  • Low 2.5 mA standby current consumption, makes it an excellent choice for solar power applications.
  • Housed in a small, relay-type housing
  • Surge protection
Power Supply 9 – 41 VDC or 6 – 29 VAC
Power Supply Tolerance +/-20% from the power rating
Stand-by Current 2.5mA maximum
Detect Current 50mA maximum
Relay Type DPDT
Relay Rating 1A 24V DC 120V AC
Sensitivity High, Low adjustment
Off Delay 1 to 5 seconds adjustment
Control Unit Temperature Range -40° F to 170° F
Probe Temperature Range -40° F to 170° F
Power On Indicator High intensity Green LED
Detect Indicator High intensity Red LED
Sensitivity Control Continuous adjustment
Off Delay Control Continuous adjustment
Surge Protection MOV, neon and silicon protection devices
Control Unit Housing Break resistant Polycarbonate H:2.2”(55mm), W:1.6”(41mm), D:3.25”(84mm)
Connector 86CP11 11 pin connector
Probe PVC water tight housing (Length 17”, Diameter 1”) with shielded direct burial lead-in cable

Black 11 pin socket base for DIN rail mount

Sensing probe with 50 or 100 ft lead

11 position harness
3 feet of wire

Gray 11 pin socket base for DIN rail mount

Adobe_PDF_file_icon_32x32Spec Sheet