EMX Inc.
Sensors and Electronic Accessories for Gate and Doors EMX Inc

Infrared Modulated PC-3

Used as a safety device in conjunction with the automatic operator. An easy to install, cost effective photocell used with garage doors and rolling doors.

Features of the PC-3

• Will work with any control board that accepts dry contact in the safety input.
• LED alignment indicator simplifies installation.
• Supervised relay output provides an "open" signal in case of power failure.
• Non-reflective through-beam system is not affected by shiny surfaces.
• Modulated infrared beam is not affected by sunlight, rain, dust or dirt.
• No calibration or sensitivity adjustments are necessary.
• Wide detection angle of 24 degrees simplifies installation and increases the reliability of operation.
• Indoor or outdoor operation of 30 feet.

Technical Information

The PC-3 transmitter and receiver are mounted in line of sight at a distance of up to 30 feet apart. When the infrared beam is interrupted, the relay common and normally open contacts in the receiver are closed. The LED indicator is lit when the PC-3 receiver is not aligned or when the beam is interrupted.

Installation Bracket
Installation Bracket
⇒ PC-3 Cut Sheet
  ⇒ PC-3 Installation Instructions
MVP D-TEKLP-D-TEK Retro-Reflective Photoeye NIR Infrared Modulated Photocell IRB-4X Infrared Modulated PC-3 Mini Infra-Red Eye BP 10 Infrared Photocell IRB-325 Retro-Reflective Photoeye NIRPlus Photo Electric Sensors P41 Infrared Photoeye P45 Vehicle Loop Detector D-TEK Board Vehicle Loop Detector D-Tek Box Lite Preformed Loop Detector Loop Detector Accessories Outdoor Magnetic Lock Water-Proof Proximity Keypad Access Control PRX-320 Outdoor Buried Driveway Alert Sensor Carsense 101 Outdoor Buried Driveway Sensor Alarm 
Carsense 202 Slim Surface Mounted Loop Pad SP-24 Seven Day Timer DTM-9 Single Channel RF Transmitter & Receiver Long Ranger 650 ULTRA D-TEK : Plug in Style Vehicle Loop Detector Ultra II D-TEK : Vehicle Loop Detector