ULTRA-DIN
ULTRA-DIN

ULTRA-DIN

DIN Rail Mount Vehicle Loop Detector

  • Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
  • Easy to install and setup with the ULTRAMETER™ sensitivity display
  • Low current draw – green product
  • Easy identification of interference problems using the cross talk and RFI interference display
  • Fits into small operator housings, saving space

The ULTRA-DIN vehicle loop detector combines small size with full-featured functionality in a DIN rail mount module.

The ULT-DIN features DETECT-ON-STOP™ or (DOS) technology, which allows detection only when a vehicle has come to a complete stop on the loop. This exclusive feature is unique to EMX and is a major advantage if you want to ignore cross traffic in tight spaces.

The ULT-DIN provides relay contact outputs indicating vehicle presence and a set of output contacts for loop fault or pulse on entry /pulse on exit, or DETECT-ON-STOP.

  • DIN rail mount – 35mm width
  • ULTRAMETER™ displays optimum sensitivity setting/crosstalk interference
  • DETECT-ON-STOP™ allows detection only when a vehicle has come to a complete stop on the loop
  • 10 sensitivity settings
  • 4 operating frequencies
  • Automatic sensitivity boost (ASB), delay, fail-safe/fail-secure and infinite or normal (5 min.) presence.
  • Small size: 74 x 23 x 84 mm
  • Set of output contacts for loop fault or pulse on entry /pulse on exit, or the new EMX feature, DETECT-ON-STOP™
  • CE compliant
Sensitivity 10 levels, 0-9
UltraMETER™ display Indicates optimum sensitivity level, 0-9 Diagnostic aid
Loop frequency 4 settings (low, med-low, med-hi, high)
Loop inductance 20…2000?H (Q factor > 5)
Grounded loop Isolation transformer allows operation with poor quality loops
Automatic tuning Detector tunes to loop on power-up and following frequency count function
Environmental tracking Automatic compensation
Surge protection Loop circuitry protected by surge suppressors
Presence relay SPDT relay contacts (form C)
Output B relay SPST relay contact (form A) (available on ULT-DIN only)
Contact ratings 1A @ 24VDC…120VAC
Power / loop fault indicator Green LED
Detect / frequency count indicator Red LED
Detect On Stop Requires vehicle to stop for a minimum of 1 second (1-2s typical) (available on ULT-DIN only)
ASB (Automatic Sensitivity Boost) Increases sensitivity after initial detection to prevent dropout due to high-bed vehicles
Power 12VDC…24VDC, 24VAC
Operating current 15mA standby / 45mA detect
Operating temperature -40?C…82?C (-40?F…180?F) 0…95% relative humidity
Dimensions (L x W x H) 80mm (3.2”) x 23mm (0.9”) x 84mm (3.3”)
Weight 0.25 lbs. (113 g)
Mounting method DIN rail mount – 35mm width
Connections ULT-DIN 10 screw terminals, ULT-DIN-1 8 screw terminals

PR-LOOP
Preformed loop
2×6, 4×6, 4×8, 4×10, 6×10 or 8×12 ft with 50 ft lead

TSTL
Test loop
1.25 x 1.25 x 0.75 inches

Adobe_PDF_file_icon_32x32Spec Sheet
Adobe_PDF_file_icon_32x32Manual
Adobe_PDF_file_icon_32x32Detect-on-Stop Technology
Adobe_PDF_file_icon_32x32Loop Sizes
Adobe_PDF_file_icon_32x32Loop Installation
Adobe_PDF_file_icon_32x32Preformed Loop Spec Sheet
Adobe_PDF_file_icon_32x32Test Loop Instructions