LP D-TEK
LP D-TEK

LP D-TEK

Low Power Vehicle Detector

  • Low power consumption, ideal for solar power applications
  • Reduced energy costs
  • Operates in both fail safe and fail secure modes

The LP D-TEK was designed for applications where low power consumption is desired. The LP D-TEK’s low 9 mA current draw makes it ideal for solar applications and gate or door operators that require many accessories drawing from the same power supply.

  • 9 mA current draw standby and detect modes “fail safe”
  • Surge protection
  • Loop isolation transformer
  • Built-in loop conditioner
  • Aluminum RF shield housing
  • Loop diagnostics
  • Frequency counter
  • 2 relays
Power Supply 12 – 24 Volts AC/DC
Current Consumption < 9 mA
Operating Temp -40°F to 180°F
Surge Protection Zener Diode /MOV
Output Relays (2) 1Amp 30 VDC
Loop Input Transformer isolation, lightning and transient protection (1)
Loop Inductance Range 20 – 2000 uH Q-factor of 5 or higher
Tuning Automatic on reset or power up
Tracking Automatic for environmental changes
Size Height 3.25” (83mm) Width 2.56” (40mm) Length 3.65” (90mm)
Housing Extruded Anodized Aluminum
Connector 86CP11 11 pin male

HAR-11
11 position harness
3 feet of wire

LD-11
Gray 11 pin socket base for DIN rail mount

LD-11B
Black 11 pin socket base for DIN rail mount

PR-LOOP
Preformed loop
2×6, 4×6, 4×8, 4×10, 6×10 or 8×12 ft with 50 ft lead

TSTL
Test loop
1.25 x 1.25 x 0.75 inches

Adobe_PDF_file_icon_32x32Spec Sheet
Adobe_PDF_file_icon_32x32Manual
Adobe_PDF_file_icon_32x32Loop Sizes
Adobe_PDF_file_icon_32x32Loop Installation
Adobe_PDF_file_icon_32x32Preformed Loop Spec Sheet
Adobe_PDF_file_icon_32x32Test Loop Instructions